Karaca Meister Sterilizer Stand Knife Set - White

Karaca Meister Sterilizer Stand Knife Set

Material: Steel

It can be washed in the dishwasher. (60 degrees is recommended.)
Way of Working
Sterilization with UV light wave + sterilization with ozone (UV wavelength of 253.7 nm, ozone created by chemical reaction with air) Heat generation by PTC Heater + additional drying by heat circulation by small fan, internal temperature value of 45-70 degrees.

Usage
1. First, open the product packaging and check whether the product is in good condition. Then, place the product on the table or counter and insert the plug into the socket with the appropriate voltage.
2. The sterilization programs in the device can be operated with a single button. When you press the power button once, the indicator lamp will turn on with the warning sound and the two functions will start working together (hot drying and UV sterilization). PTC heater, fan and UV lamp will be activated. The indicator lamp will illuminate during operation. The processing time is 40 minutes, after which the device will automatically turn off. If you wish, you can also turn off the device yourself by pressing the power button during the process.
3. At the end of the process, the indicator lamp flashes at 0.5 second intervals.
it will start to turn off.

note
1. Clean and dry the device before use.
2. Operate the device on a clean, flat and hard surface.

Cleaning and Maintenance
1. Do not wash the device with water. Wipe the outer surface with a towel.
2. In case of any malfunction in the device,
Do not try to repair it within your means. Control and repair procedures
Send the device to the authorized technical service for

2 Years Warranty.